หัวข้อ 4.6
Totally enclosed lifeboats
บทที่ IVหน้า 3212 ข้อกำหนด
เนื้อหานี้มาจากการถอดข้อความด้วย OCR
ข้อความอาจมีความคลาดเคลื่อน โดยเฉพาะหน่วยตัวเลขและเลขข้อ ยึดถือภาพหน้าสแกนต้นฉบับหรือเอกสาร IMO ฉบับทางการเป็นหลัก
4.6.1Totally enclosed lifeboats shall comply wilh the requirements of section 4.4 and in addition shall comply with the requirements of this section,
4.6.2Enclosure Every totally enclosed lifeboat shall be provided with a rigid watertight enclosure which completely encloses the ltteboat. The enclosure shall be so arranged that: A it prowdes shelter for the occupants; Br J access to the lifeboat is provided by hatches which can be closed to make the lifeboat watertight; 3 except for free-fall lifeboats, hatches are positioned so as to allow launching and recovery operations to be periormed without any occupant having to leave the enclosure; 4 access hatches are capable of being opened and closed from both inside and outside and are equipped with means to hold them securely in open positions; 56 escept for a free-fall lifeboat, it is possible to row the lifeboat; 6 it is capable, when the Ifeboat is in the capsized position with the hatches closed and without significant leakage, of supporting the entire mass of the lteboat, including all equipment, machinery and its full complement of persons; 7 it includes windows or translucent panels which acmit sufficient daylight to the inside of the liteboat with the hatches closed to make artificial light unnecessary; * See the arkditional information section for the amendments applicable tn totally enclosed lifeboats installed on.or after 1 january 2029, as adopted by resolution MSC" 53107) 4 its exterior is of a highly visible colour and its interior of a light colour which does not cause discombort to the oocupants; 9 handrails provice a secure handhold for persons moving about the exterior of the lifeboat, and aid embarkation and disembarkation; 10 persons have access to their seats from an entrance without having to climb over thwarts or other obstructions, anc 0 dunng operation of the engine with the enchosure closed, the atmosphenc pressure inside the liteboat shall never be above or below the outside atmosphenc pressure by more than 20 hPa.
4.6.3Capsizing and re-righting
4.6.3.1Except in free-iall lifeboats, a safety belt shall be fitted at each indicated seating position. The safety belt shall be designed to hold a person with a mass of 100 kg securely in place when the lifeboat is in a capsized position. Each set of safety belts for a seat shall be of a colour which contrasts with the belts for seats immediately adjacent. Free-fall liteboats shall be fitted with a salety harness at each seat in contrasting colour desiened to bold a person with a mass of 100 ke securely in place during a free-fall launch as well as with the lifeboat in capsized position.
4.6.3.2The stability of the lifeboat shall be such that it is inherently or automatically sell-righting when loaded with its full or a partial complement of persons and equipment and all entrances and openings are closed watertight and the persons are secured with safety belts.
4.6.3.3The lifeboat shall be capable of supporting its full Complement of persons and equipment when the lifeboat is in the damaped condition prescribed in 4.41.1 and its stability shall be such that, in the event of capsizing, it will automatically attain mon that will provide an above-water escape for its oocupants. When the lifeboat is in the stable ion, the water level inside the lifeboat, measured along the seat back, shall not be more than 500. mm above the seat pan at any occupant seating position.
4.6.3.4The design of all engine exhaust pi aie ducts and other openings shall be such that water is excluded trom the engine when the wes and re-mghts.
4.6.4Propulsion
4.6.4.1The engine and transmission shall be controlled from the helmsman’s position.
4.6.4.2The engine and engine installation shall be capable of running in any position during capsize and continue to run after the lifeboat returns to the upright or shall automatically stop on capsizing and be easily restarted after the lifeboat returns to the upright. The design of the fuel and lubricating systems shall prevent the loss of fuel and the loss of more than 750 mL of bubricating oil from the engine during capsize.
4.6.4.3Air-cooled enpines shall have a duct system to take in cooling air trom, and exhaust it to, the outside of the lifeboat. Manually operated dampers shall be provided to enable cooling air to be taken in from, and exhausted to, the intenor of the lifeboat.
4.6.5Protection against acceleration Notwithstanding paragraph 4.4.1.7, a totally enclosed lifeboat, except a free-fall lifeboat, shall be so constructed and fendered that the liteboat renders protection against harmful accelerations resulting from an impact of the lifeboat, when loaded with its full complement of persons and equipment, against the ship's side at an impact velocity of not less than 3.5 m/s.