Life-Saving AppliancesSOLAS · LSA Code

Regulation 38

Alternative design and arrangements

Part C19 paragraphs
1Purpose The purpose of this regulation is to provide a methodology for alternative design and arrangements for life- saving appliances and arrangements.
2General
2.1Life-saving appliances and arrangements may deviate from the requirements set out in part B, provided that the alternative design and arrangements meet the intent of the requirements concerned and provide an equivalent level of safety to this chapter.
2.2When alternative design or arrangements deviate from the prescriptive requirements of part B, an engineering analysis, evaluation and approval of the design and arrangements shall be carried out in accordance with this regulation.
3Engineering analysis The engineering analysis shall be prepared and submitted to the Administration, based on the guidelines developed by the Organization* and shall include, as a minimum, the following elements:
.1determination of the ship type and the life-saving appliance and arrangements concerned;
.2identification of the prescriptive requirement(s) with which the life-saving appliance and arrangements will not comply;
.3identification of the reason the proposed design will not meet the prescriptive requirements supported by compliance with other recognized engineering or industry standards;
.4determination of the performance criteria for the ship and the life-saving appliance and arrangements concerned addressed by the relevant prescriptive requirement(s):
.1performance criteria shall provide a level of safety not inferior to the relevant prescriptive requirements contained in part B; and
.2performance criteria shall be quantifiable and measurable;
.5detailed description of the alternative design and arrangements, including a list of the assumptions used in the design and any proposed operational restrictions or conditions;
.6technical justification demonstrating that the alternative design and arrangements meet the safety performance criteria; and
.7risk assessment based on identification of the potential faults and hazards associated with the proposal.
4Evaluation of the alternative design and arrangements
4.1The engineering analysis required in paragraph 3 shall be evaluated and approved by the Administration, taking into account the guidelines developed by the Organization.*
4.2A copy of the documentation, as approved by the Administration, indicating that the alternative design and arrangements comply with this regulation, shall be carried on board the ship.
5Exchange of information The Administration shall communicate to the Organization pertinent information concerning alternative design and arrangements approved by them for circulation to all Contracting Governments.
6Re-evaluation due to change of conditions If the assumptions and operational restrictions that were stipulated in the alternative design and arrangements are changed, the engineering analysis shall be carried out under the changed condition and shall be approved by the Administration.

Footnotes

  1. 1.Refer to Revised guidelines on alternative design and arrangements for SOLAS chapters 1/-1 and Ill (MSC.1/Circ.1212/Rev.2).
  2. 2.Refer to Revised guidelines on alternative design and arrangements for SOLAS chapters 1/-1 and Ill (MSC.1/Circ.1212/Rev.2).