Section 1.2
General requirements for life-saving appliances
Chapter IPage 61 clause
This content comes from OCR text extraction
The text may contain inaccuracies, especially units and clause numbers. Treat the original scanned pages or the official IMO document as authoritative.
1.2.2Unless expressly provided otherwise or unless, in the opinion of the Administration having regard to the particular voyages on which the ship is constantly enpaped, other requirements are appropriate, all life-saving appliances presonbed in this part shall: J) be constructed with proper workmanship and materials; 2 not be damaged in stowage throughout the air temperature range —30°C to 465°C and, in the case of personal life-saving appliances, unless otherwise specified, remain operational throughout the air temperature range of —15°C to +40°C; 3 if they are likely to be immersed in seawater during their use, operate throughout the seawater temperature range —1°C to 430°C; 40 where applicable, be rot-prool, corrosion-resistant, and not be unduly affected by seawater, oil or fungal attack; 4 where exposed to sunlight, be resistant to deterioration; 6 = be of an international or vid reddish orange, of at a comparably highly visible colour on all parts where this will assist detection at sea: 7 be fitted with retro-reflective material where it will assist in detection and in accordance with the recommendations of the Organizatior,” 4 if they are to be used in a seaway, be capable of satisiactory operation in that environment; 9 be cearly marked with approval information, including the Administration which approved il and any operational restrictions; and 100 where applicable, be provided with electrical short-circuit protection to prevent damage or 1.2.3) The Administration shall determine the penod of acceptability of life-saving appliances which are subject to deterioration with ape. Such life-saving appliances shall be marked with a means for determining their age or the date by which they must be replaced. Permanent marking with a date of expiry ts the preferred method of establishing the period of acceptability. Batteries not marked with an expiration date may be used if they are replaced annually, or in the case of a secondary battery (accumulator), if the condition of the electrolyte can be readily checked. In the case of ic life-saving appliances, the date of expiry shall be indelibly marked on the product by the r a LC Personal lite-saving appliances =~