Section 2.1
Lifebuoys
Chapter IIPage 74 clauses
This content comes from OCR text extraction
The text may contain inaccuracies, especially units and clause numbers. Treat the original scanned pages or the official IMO document as authoritative.
2.1.1Lifebwoy specification Every lifebucy shall: 100 have an owter diameter of not more than 800 mm and an inner diameter of not less than 400) mim; 20 be constructed of inherently buoyant material; it shall not depend upon rushes, cork shavings or granulated cork, any other loose granulated material or any air compartment which depends on 3 be capable of supporting not bess than 14.5 kp of iron in fresh water for a period of 24 h; 4 have a mass of not less than 2.5 ke: 5 notsustain buming or continue melting after being totally enveloped in a fire fora period of 2 5; 6 | be constructed to withstand a drop into the water from the herght at which it is stowed above the waterline in the hphtest seapoing condition or 30m, whichever is the greater, without impainng either its operating capability or that of its attached components; 7 of itis intended to operate the quick-release arrangement provided for the self-activated smoke signals and seli-reniting lights, have a mass of not less than 4 kp; and * Refer to Revised recommendation on the use and fitting of retro reflective material on life-saving appliances (resolution M5C_ AB 1102). 4 be fitted with a grabline not less than 9.5 mm in diameter and not less than four times the outside diameter of the body of the bucy in length. The grabline shall be secured at four equidistant points around the circumference ol the buoy to form four equal loops.
2.1.2Litebuoy self-igniting lights Seli-igniting lights required by regulation IV7.1.3 shall: J be such that they cannot be extinguished by water; 2 be of white colour and capable of either burning continuously with a luminous intensity of not less than 2? cd im all directions of the upper hemisphere or flashing (discharge flashing) at a rate of not less than 50 flashes and not more than 70 flashes per minute with at least the corresponding effective burninous intensity; 3 be prowided with a source of energy capable of meeting the requirement of paragraph 2.1.2.2 for a period of at least 2 h; and 4 be capable of withstanding the drop test required by paragraph 2.1.1.6.
2.1.3Lifebuoy self-activating smoke signals Seli-activating smoke signals required by regulation II/7.1.3 shall: Jo emit smoke of a highly visible colour at a uniborm rate for a period of at least 15 min when floating in calm water; 2 St nie ext eeTeny er etree ey Fae eae ep ren Crome Sune Or Hie apes 3 not be swamped in a seaway,; e 4 continue to emit smoke when fully submerged in water for a period of at least 10 s; 3 be capable of withstanding the drop test required by paragraph 2.1.1.6; and 6 be provided with a quick-release affangement that will automatically release and activate the signal and associated self-igniting fight connected to a lifebuey having a mass of not more than 4 ke
2.1.4Buoyant lifelines Buoyant lielines required by regulation II/7-1.2 shall: 1s be non-kinking; 2 have a diameter of not less than 8 mn and 2 have a breaking strength of not bess than 5 kN.